[Method of Implementation] USB 2.0 Type-C™ Device Electrical Compliance Test 


The USB 2.0 Type-C™ Device Electrical Compliance Test MOI described the detailed USB-IF compliance test procedures for measuring the USB2.0 electrical compliance test parameters of USB device products.

DOWNLOAD: [Method of Implementation] USB 2.0 Type-C™ Device Electrical Compliance Test

           

To purchase the compliance test fixtures please contact info@testusb.com


Compliance parameters:
-    Device Hi-Speed Signal Quality Test (EL_2, EL_4, EL_5, EL_6, EL_7) 
-    Device Packet Parameters (EL_21, EL_22, EL_25)
-    Device CHIRP Timing (EL_28, EL_29, EL_31)
-    Device Suspend/Resume/Reset Timing (EL_27, EL_28, EL_38, EL_39, EL_40)
-    Device Test J/K, SE0_NAK (EL_8, EL_9)
-    Device Full Speed Signal Quality
-    Device Inrush Current
-    Current Measurements


[Method of Implementation] USB 2.0 Type-C™ Embedded Host Electrical Compliance Test 


The USB 2.0 Type-C™ Embedded Host Electrical Compliance Test MOI described the detailed USB-IF compliance test procedures for measuring the USB2.0 electrical compliance test parameters of USB Embedded Host products.

DOWNLOAD: [Method of Implementation] USB 2.0 Type-C™ Embedded Host Electrical Compliance Test

               

For purchase the compliance test fixtures please contact info@testusb.com


Compliance parameters:
-    Embedded Host High-Speed Signal Quality Test (EL_2, EL_3, EL_6; EL_7) 
-    Embedded Host Packet Parameters ( EL_21, EL_25, EL_23, EL_22, EL_55)
-    Embedded Host Chirp Timing (EL_33, EL_34, EL_35)
-    Embedded Host Suspend/Resume Timing (EL_39, EL_41)
-    Embedded Host Test J/K, SE0_NAK (EL_8, EL_9)
-    Embedded Host Full Speed Signal Quality