USB 3.0 SuperSpeed USB Compliance Testing

 
For the USB-IF Compliance program a USB 3.0 product should under go the following test:
USB 3.0   Super Speed Electrical 
xHCI Host test USB 3.0 Interop USB 3.0 Backwards Compatibility
Link layer Test
USBCV Power Consumption Drop Droop EMI test
USB 2.0
Battery Charging tests
Host       Y Y Y
Y Y Y Y M Y Y F
Device   Y Y Y Y Y Y Y F
Hub       Y Y Y Y Y Y Y M Y Y F

Y = Always required
F = Required if feature is supported
M = Required if there are multiple downstream ports

When submitting for USB-IF Compliance also take care of the following:
- Check that the product complies with the USB-IF requirements of the USB-IF Compliance website
- Complete the required Checklists
- Make sure that the used Cable and Connectors are USB-IF certified !!! (check the Integrators List - USB-IF members only-)